Hellcat, Trackhawk, Demon Blower Spacer Plates:

order-online

After first seeing a Hellcat/Trackhawk in person we saw the IAT sensor location issue and figured we’d apply the same tech that we do to the other cars we make parts for.
So let’s isolate the blower from the engine, let’s get that IAT sensor to read true and let’s also get the blower to run at a colder temperature.

During R&D we were shocked to find that the cylinder head on the Hellcat/Trackhawk carried over from the NA engine with the oil fill port on the mating face of the head!

And then even more shocked to see how they have attempted to seal this area with the factory gasket (see video).

So we went about making a double sided o-ring Spacer plate to not only make your intake temps colder but to also help fix the oil blow by issues you are suffering from

These plates will:
Lower intake temps
Lower blower running temperature
Better resolution of IAT sensor
Eliminates factory gasket
Help reduce oil blow by

As a total package: Blower Plates, 12.9 grade longer bolts, thermal blanket we are going to offer them at $600 AUD (about $430 USD)

Click here to see before/after dyno and data logs: https://fiinterchillers.com/hellcat-spacer-plate-comparison/

hellcat blower spacers plates 1

Custom made o-rings on both sides of the plates as well as the oil gallery to help with blow by issueshellcat blower 2

order-online