LSA Intercooler Brick Reinforcement

$171.81$384.71

Did you know the end tank in your LSA intercooler brick can collapse even under stock boost pressure?
This reduces coolant flow and raises the intake temp.
Send your intercooler in to us to get strengthened and if also required you can send the front inlet to be converted to AN threaded fittings.

LSA Intercooler Brick ReinforcementWe fix these bricks all the time on the LSA platform

We wanted to show you our test rig we have setup which allows us to pressure test each brick, push the bowed end tank back out with about 20psi of air pressure and a little heat from a blow torch.
BD2444E1-F77B-4755-8F39-5A62A4669974

We then strengthen the end tank by welding a plate to the center and all corners of the brick.

The brick is then much stronger and the end tank is unable to bow anymore.

After welding we then pressure test the core checking for any leaks.

We first noticed this issue on our own car where we were originally crossing the finish line around 40-45c IAT2 then all of a sudden it jumped up to 90c at this point we found the end tank had collapsed.

If you own an LSA you need to fix this issue.
Strengthen your LSA intercooler brick today for $230 AUD

If you are a workshop get in touch we can make this same test rig for you to repair bricks for your customers on site, the cost is only $285 AUDLSA Intercooler Brick Reinforcement

Clear

Frequently Asked Questions

Click on a tab below to learn more about each item.

Additional information

Options

Strengthen LSA Intercooler Brick, Strengthen LSA Intercooler Brick and Convert LSA front inlet to AN